If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Restringing necklace -- length increase?
Why would you need to knot between each bead if it wasn't strung that way to
begin with. Or if you have beads leftover make earrings out of them. Roxan "DaveC" wrote in message al.net... I'm restringing a necklace of red coral beads. My first inclination was knotting between each bead, but I'm concerned with the increase in the length of the necklace. This would basically double the length (I'm using two #4 threads). I could knot between every 2 or 3 beads, to keep down the length increase. I could leave out as many of the beads as to keep the length down, but then I've got beads left over (I'm not an artist who could use these again; just a practical consumer who wants to rebuild a personal item), and I've not got the original content (number of beads) of the necklace. Any other options? Two strands, interwoven, maybe? Comments and suggestions welcome, Thanks, -- DaveC This is an invalid return address Please reply in the news group |
Ads |
#2
|
|||
|
|||
In article et,
says... I'm restringing a necklace of red coral beads. My first inclination was knotting between each bead, but I'm concerned with the increase in the length of the necklace. This would basically double the length (I'm using two #4 threads). Unless you specifically want to do knotting so that if it should break you only lose at most 2 beads, there's no real reason to knot coral. I'd just restring it to the length you want. Celine -- Handmade jewelry at http://www.rubylane.com/shops/starcat "Only the powers of evil claim that doing good is boring." -- Diane Duane, _Nightfall at Algemron_ |
#3
|
|||
|
|||
What was the necklace originally strung on? Maybe you could restring on a
stronger material such as Fireline. Marisa (AU/NZ) "DaveC" wrote in message al.net... I'm restringing a necklace of red coral beads. My first inclination was knotting between each bead, but I'm concerned with the increase in the length of the necklace. This would basically double the length (I'm using two #4 threads). I could knot between every 2 or 3 beads, to keep down the length increase. I could leave out as many of the beads as to keep the length down, but then I've got beads left over (I'm not an artist who could use these again; just a practical consumer who wants to rebuild a personal item), and I've not got the original content (number of beads) of the necklace. Any other options? Two strands, interwoven, maybe? Comments and suggestions welcome, Thanks, -- DaveC This is an invalid return address Please reply in the news group |
#4
|
|||
|
|||
Knotting pearls was originally done because of the rarity of natural pearls,
so if the strand broke you wouldn't lose more than one. Usually a knot is calculated to be 1/16 inch. Tina "DaveC" wrote in message al.net... I'm restringing a necklace of red coral beads. My first inclination was knotting between each bead, but I'm concerned with the increase in the length of the necklace. This would basically double the length (I'm using two #4 threads). I could knot between every 2 or 3 beads, to keep down the length increase. I could leave out as many of the beads as to keep the length down, but then I've got beads left over (I'm not an artist who could use these again; just a practical consumer who wants to rebuild a personal item), and I've not got the original content (number of beads) of the necklace. Any other options? Two strands, interwoven, maybe? Comments and suggestions welcome, Thanks, -- DaveC This is an invalid return address Please reply in the news group |
#5
|
|||
|
|||
In article 1073072151.586083@prawn, says...
Knotting pearls was originally done because of the rarity of natural pearls, so if the strand broke you wouldn't lose more than one. Which, my partner points out, makes hash of one of the standard cliches in old comedy movies -- the one where the lady's pearl necklace breaks and suddenly there are pearls all over the floor and people start falling like tenpins. Wouldn't happen. Celine -- Handmade jewelry at http://www.rubylane.com/shops/starcat "Only the powers of evil claim that doing good is boring." -- Diane Duane, _Nightfall at Algemron_ |
#6
|
|||
|
|||
Dave,
Why can't you use something like softflex and crimps? This is very strong and no knotting is required? KathyH "DaveC" wrote in message al.net... I'm restringing a necklace of red coral beads. My first inclination was knotting between each bead, but I'm concerned with the increase in the length of the necklace. This would basically double the length (I'm using two #4 threads). I could knot between every 2 or 3 beads, to keep down the length increase. I could leave out as many of the beads as to keep the length down, but then I've got beads left over (I'm not an artist who could use these again; just a practical consumer who wants to rebuild a personal item), and I've not got the original content (number of beads) of the necklace. Any other options? Two strands, interwoven, maybe? Comments and suggestions welcome, Thanks, -- DaveC This is an invalid return address Please reply in the news group |
#7
|
|||
|
|||
Crimps are little metal bands that you crimp to hold the ends of your
pieces. Here is a tutorial on using crimp beads. Go to the end to see crimp bead. http://64.55.42.241/tips/tips_detail..._and_Stringing Roxan "DaveC" wrote in message al.net... On Sat, 3 Jan 2004 6:56:57 -0800, mkahogan wrote (in message ): Why can't you use something like softflex and crimps? This is very strong and no knotting is required? I'm using two Griffin Naturseide #4 silk cords together. I'm sure there's little chance of breakage. I just liked the idea of the colored (yellow) thread knot contrasting between the beads. Maybe it's best to just duplicate the original design for security's sake. What are crimps? Thanks, -- DaveC This is an invalid return address Please reply in the news group |
#8
|
|||
|
|||
Here is a better illustration on crimping.
http://www.bead-co.com/beadco_instruction.htm Roxan "DaveC" wrote in message al.net... On Sat, 3 Jan 2004 6:56:57 -0800, mkahogan wrote (in message ): Why can't you use something like softflex and crimps? This is very strong and no knotting is required? I'm using two Griffin Naturseide #4 silk cords together. I'm sure there's little chance of breakage. I just liked the idea of the colored (yellow) thread knot contrasting between the beads. Maybe it's best to just duplicate the original design for security's sake. What are crimps? Thanks, -- DaveC This is an invalid return address Please reply in the news group |
#9
|
|||
|
|||
Ahha. If it's the color of the knotting between the beads you like, there's
an easy way to cheat. (The emphasis being on EASY). String the color alternately with a seed bead in the color you like. One reason that I personally don't recommend the knotting, is that it takes skill to do it well. And it's quite noticeable when it is not done well. Tina "DaveC" wrote in message al.net... On Sat, 3 Jan 2004 6:56:57 -0800, mkahogan wrote (in message ): Why can't you use something like softflex and crimps? This is very strong and no knotting is required? I'm using two Griffin Naturseide #4 silk cords together. I'm sure there's little chance of breakage. I just liked the idea of the colored (yellow) thread knot contrasting between the beads. Maybe it's best to just duplicate the original design for security's sake. What are crimps? Thanks, -- DaveC This is an invalid return address Please reply in the news group |
#10
|
|||
|
|||
You could put a chain expanded on it. Basically it is a length of chain
with links large enough to get a hook through. Shirley In article et, DaveC writes On Sat, 3 Jan 2004 11:53:08 -0800, Christina Peterson wrote (in message 1073159588.299582@prawn): Ahha. If it's the color of the knotting between the beads you like, there's an easy way to cheat. (The emphasis being on EASY). String the color alternately with a seed bead in the color you like. What's a "seed" bead? One reason that I personally don't recommend the knotting, is that it takes skill to do it well. And it's quite noticeable when it is not done well. Well, now I've done it! I threaded all the beads (the original beads only, none added) onto the new silk cord (large diameter -- #4 -- thread). It won't go around my neck! It's short by about 3 inches. It's been a long time since this necklace was together, so I'm not sure how "loose" the beads were on the original, but I'm sure I've not lost any. I suppose I could take all these off and re-thread, using knotting. But first I'm looking at my options... Suggestions? Thanks, -- Shirley Shone |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pic of the Holiday Swap Package Necklace | Barbara Forbes-Lyons | Beads | 4 | December 3rd 03 12:19 AM |
Necklace from my "bead kit" | Carol in SLC | Beads | 14 | September 14th 03 07:22 AM |
new sunflower necklace (links) | Beadbimbo | Beads | 10 | August 18th 03 01:47 PM |
My Kandice bead necklace | Carol in SLC | Beads | 11 | July 23rd 03 02:20 AM |