If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
using glass in an electric kiln
Hello,
As I mentioned in my previous post I have recently picked up a scutt 818-p kiln. It has an additional wired ring. I have been wanting to get back into pottery for many years now after taking lots of classes as a teen. I have juat come across a term called slumping whereby glass is laid over a mold. Would I be able to slump in the type of kiln I have? Regards |
Ads |
#2
|
|||
|
|||
using glass in an electric kiln
"light.spirited" wrote in message ups.com... Hello, As I mentioned in my previous post I have recently picked up a scutt 818-p kiln. It has an additional wired ring. I have been wanting to get back into pottery for many years now after taking lots of classes as a teen. I have juat come across a term called slumping whereby glass is laid over a mold. Would I be able to slump in the type of kiln I have? Regards Sure - you just need to know what temperature to fire to and where to ramp the firing (slow heating, slow cooling, soaking, etc.). There is a lot out there on it as well. http://www.warmglass.com/Basic_Process.htm http://www.skutt.com/glass/support/firing.php http://store.allstainedglass.com/mopr.html http://twovoyagers.com/metamorphosis/faq/faqv.html |
#3
|
|||
|
|||
using glass in an electric kiln
DKat wrote:
"light.spirited" wrote in message ups.com... Hello, As I mentioned in my previous post I have recently picked up a scutt 818-p kiln. It has an additional wired ring. I have been wanting to get back into pottery for many years now after taking lots of classes as a teen. I have juat come across a term called slumping whereby glass is laid over a mold. Would I be able to slump in the type of kiln I have? Regards Sure - you just need to know what temperature to fire to and where to ramp the firing (slow heating, slow cooling, soaking, etc.). There is a lot out there on it as well. http://www.warmglass.com/Basic_Process.htm http://www.skutt.com/glass/support/firing.php http://store.allstainedglass.com/mopr.html http://twovoyagers.com/metamorphosis/faq/faqv.html From what iknow of the black art of glass sluumping, it ain't so much the kiln as the controller... You need to be able to set cooling ramps as well as heating ramps to be able to "anneal" the glass, otherwise it cracks (sometimes some time after firing (not good if it's a litigious customer!!!!)) Alternatively i suppose you could monitor the temps yourself but i imagine it would be a serious learning curve... Muchly Hugs Eddie |
#4
|
|||
|
|||
using glass in an electric kiln
wow that's a good note! i've wanted to try slumping, not to sell th
epieces but to mess around with my own. so i'll have to cool slowly? and maybe keep the piece outside a few days before coming into the house? see ya steve On Nov 17, 8:05*am, Eddie Daughton wrote: DKat wrote: "light.spirited" wrote in message oups.com... Hello, As I mentioned in my previous post I have recently picked up a scutt 818-p kiln. It has an additional wired ring. I have been wanting to get back into pottery for many years now after taking lots of classes as a teen. I have juat come across a term called slumping whereby glass is laid over a mold. Would I be able to slump in the type of kiln I have? Regards Sure - you just need to know what temperature to fire to and where to ramp the firing (slow heating, slow cooling, soaking, etc.). There is a lot out there on it as well. http://www.warmglass.com/Basic_Process.htm http://www.skutt.com/glass/support/firing.php http://store.allstainedglass.com/mopr.html http://twovoyagers.com/metamorphosis/faq/faqv.html*From what iknow of the black art of glass sluumping, it ain't so much the kiln as the controller... You need to be able to set cooling ramps as well as heating ramps to be able to "anneal" the glass, otherwise it cracks (sometimes some time after firing (not good if it's a litigious customer!!!!)) Alternatively i suppose you could monitor the temps yourself but i imagine it would be a serious learning curve... Muchly Hugs Eddie- Hide quoted text -- Show quoted text - |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: 240v Electric Olympic Kiln Lid $250 | MarkC | Glass | 1 | May 29th 05 08:35 AM |
Another Fantasy Question - Fusing | Harry | Beads | 22 | April 19th 04 06:26 AM |
Venting of Electric Kiln question?? | Zander | Pottery | 10 | February 5th 04 06:01 PM |
For those who want to know.. Making Beach Glass With Your Tumbler! | Harry | Beads | 7 | December 22nd 03 08:19 PM |
REAL bubbles in kiln glass | Dieter Hager | Glass | 5 | September 28th 03 04:16 PM |