If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#31
|
|||
|
|||
rolling mill questions
"ted frater" a écrit dans le message de news: ... br wrote: Hello all, I've been a lost-wax caster for over thirty years, and I never really snip no problem. I'd appreciate any and all ideas, comments, etc. B.RANDALL http://www.srdfrance.com JUst an update for you. Ive checked out Via the Swiss chamber of commerce if my paillion snip Probably half the cost up front. well see. Ted. Thanks Ted for doing the leg work! I live and work about 40 minutes from snip Thanks again. B.RANDALL Well its a small world!!. snip What Id do is fly press them on my smallest!! press with a ultrasharp punch and die. snip Keep me posted. Ted. Thank you all for the informative posts about rolling mills. I got a repreive of a few months for these disks, time enough to find a supplier, I hope. My gold leaf supplier can sell me 22k 0.1mm sheet for 23euros/gram (about 904$ a Troy oz.) They sent me a square inch of it, dead soft (but that's not a big problem) and with a poor finish. Their rollers are deeply marked. I haven't yet tried to polish one side. Ted, BEYELER in Geneva was sold to ROLEX in 1999. They only have an office w/a fax at the old adress, no telephone. They had been working solely for ROLEX for quite a few years before that. Who knows, maybe I'll get back to you for a quote on those disks. B.RANDALL |
Ads |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rolling Mill | Kendall Davies | Jewelry | 13 | July 17th 12 06:07 PM |
I just picked up a ROLLING MILL , now I have some questions ! | mtnrabbit | Jewelry | 3 | November 9th 05 09:02 AM |
Slitting machine, Slitting, Rolling mill, Wire Flattening Mill, Sheet Leveler, Section Leveler, Scalping Machine, Brush Machine, coiler, decoiler, recoiler, 4 Hi, 6 Hi, 4 High, 6 High, Rolling mill, Wire Flattening Mill, Polishing Machine, Rewinding | korak | Marketplace | 0 | December 14th 03 05:52 PM |
Slitting machine, Slitting, Rolling mill, Wire Flattening Mill, Sheet Leveler, Section Leveler, Scalping Machine, Brush Machine, coiler, decoiler, recoiler, 4 Hi, 6 Hi, 4 High, 6 High, Rolling mill, Wire Flattening Mill, Polishing Machine, Rewinding | korak | Quilting | 0 | December 14th 03 05:52 PM |
Rolling mill success! | HoyoD | Jewelry | 3 | November 9th 03 04:50 AM |