If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#41
|
|||
|
|||
On Mon, 13 Sep 2004 16:01:00 +0100, liz hall wrote:
We went over to front loaders when fitted kitchens became the rage in the UK. I kep my top loader as long as it lasted. The best machine was the Hotpoint 1504 and what I liked was I could add and take out washing as I went and it was brilliant for quick washing items. The front loader seemed wasteful of water and it took a long time to get used to and we all hated them. I am 61 and never knew to turn inside out but it makes sense and now I shall try it - you never seem to old to learn. Liz Liz, the top loaders I have had have always used a LOT of water. Also, the energy efficiency of them is terrible. I only add something to my load if it is near the beginning of the wash anyways. Really, who wants something only 1/2 washed? Certainly not I, so I can never really figure those who say... Oh, but you can't add stuff to the load once it has started with a front loader... (btw, this is not the case with my front loader). Also, as Tom and a few others have also stated, it uses like about 1/4 or less of the detergent (I just use the regular laundry powder - not the fancy front loader stuff) so I make a huge saving of detergent. When I buy my detergent, it comes with a HUGE scoop in it. I throw it out and put a plastic teaspoon in the pack! I probably paid for my front loader in savings within a year.... Mavis |
Ads |
#42
|
|||
|
|||
On Mon, 13 Sep 2004 20:17:55 +0000, Debra wrote:
Interesting that you mention the front loader, Cindy. I have one of these my DH bought for me 4 yrs ago and I would never go back to a top loader. The front loader is much gentler on my clothes and washes up to 95degC for whites (but I use it for tea-towels too). I just so love it compared to my old top loader. It is much smaller too. Mavis What brand is it? Debra in VA Westinghouse... I will be upgrading soon (on acct of my insurance policy) and will be getting the latest Westinghouse... Mavis |
#43
|
|||
|
|||
Debra wrote:
On Sun, 12 Sep 2004 15:33:05 -0500, "teleflora" wrote: "Debra" wrote in message . .. If your current machine's agitator goes up and down you are going to hate the ones that rotate/swish side to side instead. They don't clean as well, and you still have the same amount of lint as your current washer. You might want to think seriously about getting a front loader instead. The only reason that I am hesitating is because I don't want to get down on my hands and knees to get clothes out of the washer. I know that's an exaggeration, but not by much. I realize that there are pedestals for the w/d to sit on, but then I lose valuable "flat surface" in my utility room. I guess everything is a trade-off. Cindy I can see that as a problem, especially if you have knee or back problems. Darn shame they don't come with the bigger doors like the commercial models do too. Debra in VA Have you seen the Dyson? Maaaaasive porthole! And NO rubber seal... Bloody ugly beast, but holds a big load too. http://www.dyson.co.uk/range/feature...CR02-S-ALLERGY I'm saving up. They are about £900. Geep! -- Kate XXXXXX Lady Catherine, Wardrobe Mistress of the Chocolate Buttons http://www.diceyhome.free-online.co.uk Click on Kate's Pages and explore! |
#44
|
|||
|
|||
"Kate Dicey" wrote in message ... Have you seen the Dyson? Maaaaasive porthole! And NO rubber seal... Bloody ugly beast, but holds a big load too. http://www.dyson.co.uk/range/feature...CR02-S-ALLERGY I'm saving up. They are about £900. Geep! Wow. That IS ugly. I just bought a Dyson vacuum, so I'm sure this thing is well made. I bet it's heavy too. Cindy |
#45
|
|||
|
|||
On Sun, 12 Sep 2004 23:12:28 -0400, Karen Maslowski
wrote: Well, some years we want jeans to fade, and some years we don't. I don't wear jeans that much, personally, but I do wear a lot of black, and I turn all black and other dark clothing inside out when I wash it. YMMV, Karen in Ohio I've heard the best way to keep black jeans from fading is to dry clean them, but who can afford that? Debra in VA |
#46
|
|||
|
|||
teleflora wrote:
"Kate Dicey" wrote in message ... Have you seen the Dyson? Maaaaasive porthole! And NO rubber seal... Bloody ugly beast, but holds a big load too. http://www.dyson.co.uk/range/feature...CR02-S-ALLERGY I'm saving up. They are about £900. Geep! Wow. That IS ugly. I just bought a Dyson vacuum, so I'm sure this thing is well made. I bet it's heavy too. Cindy I dunno - I don't intend to pick it up! ;D It will live out in my lean-to conservatory/laundry space, so ugly as sin causes me no problems either. The front slopes, so no way to fit a decor panel. -- Kate XXXXXX Lady Catherine, Wardrobe Mistress of the Chocolate Buttons http://www.diceyhome.free-online.co.uk Click on Kate's Pages and explore! |
#47
|
|||
|
|||
That's something I need! I don't think it's ugly though, more
"contemporary"! Charlie. "Kate Dicey" wrote in message ... Debra wrote: On Sun, 12 Sep 2004 15:33:05 -0500, "teleflora" wrote: "Debra" wrote in message . .. If your current machine's agitator goes up and down you are going to hate the ones that rotate/swish side to side instead. They don't clean as well, and you still have the same amount of lint as your current washer. You might want to think seriously about getting a front loader instead. The only reason that I am hesitating is because I don't want to get down on my hands and knees to get clothes out of the washer. I know that's an exaggeration, but not by much. I realize that there are pedestals for the w/d to sit on, but then I lose valuable "flat surface" in my utility room. I guess everything is a trade-off. Cindy I can see that as a problem, especially if you have knee or back problems. Darn shame they don't come with the bigger doors like the commercial models do too. Debra in VA Have you seen the Dyson? Maaaaasive porthole! And NO rubber seal... Bloody ugly beast, but holds a big load too. http://www.dyson.co.uk/range/feature...CR02-S-ALLERGY I'm saving up. They are about £900. Geep! -- Kate XXXXXX Lady Catherine, Wardrobe Mistress of the Chocolate Buttons http://www.diceyhome.free-online.co.uk Click on Kate's Pages and explore! |
#48
|
|||
|
|||
"Kate Dicey" wrote in message ... teleflora wrote: "Kate Dicey" wrote in message ... Have you seen the Dyson? Maaaaasive porthole! And NO rubber seal... Bloody ugly beast, but holds a big load too. http://www.dyson.co.uk/range/feature...CR02-S-ALLERGY I'm saving up. They are about £900. Geep! Wow. That IS ugly. I just bought a Dyson vacuum, so I'm sure this thing is well made. I bet it's heavy too. Cindy I dunno - I don't intend to pick it up! ;D It will live out in my lean-to conservatory/laundry space, so ugly as sin causes me no problems either. The front slopes, so no way to fit a decor panel. Since everyone seems to enter my house thru the garage (grrrrrrrrrrrrrrrr), you'd have to walk right past it to get into the house. My utility room is my passageway. I dunno. It might be kind of fun hearing, "what the HELL is that??"" Cindy |
#49
|
|||
|
|||
Charlie wrote:
That's something I need! I don't think it's ugly though, more "contemporary"! Charlie. "Kate Dicey" wrote in message ... Debra wrote: On Sun, 12 Sep 2004 15:33:05 -0500, "teleflora" wrote: "Debra" wrote in message m... If your current machine's agitator goes up and down you are going to hate the ones that rotate/swish side to side instead. They don't clean as well, and you still have the same amount of lint as your current washer. You might want to think seriously about getting a front loader instead. The only reason that I am hesitating is because I don't want to get down on my hands and knees to get clothes out of the washer. I know that's an exaggeration, but not by much. I realize that there are pedestals for the w/d to sit on, but then I lose valuable "flat surface" in my utility room. I guess everything is a trade-off. Cindy I can see that as a problem, especially if you have knee or back problems. Darn shame they don't come with the bigger doors like the commercial models do too. Debra in VA Have you seen the Dyson? Maaaaasive porthole! And NO rubber seal... Bloody ugly beast, but holds a big load too. http://www.dyson.co.uk/range/feature...CR02-S-ALLERGY I'm saving up. They are about £900. Geep! -- Kate XXXXXX Lady Catherine, Wardrobe Mistress of the Chocolate Buttons http://www.diceyhome.free-online.co.uk Click on Kate's Pages and explore! Yeah, but the pix don't show the silver gray, purple, and lemon yellow version... Bleah! -- Kate XXXXXX Lady Catherine, Wardrobe Mistress of the Chocolate Buttons http://www.diceyhome.free-online.co.uk Click on Kate's Pages and explore! |
#50
|
|||
|
|||
Kate Dicey wrote:
DH sat in the car while James and I went round the shop... I bought 6 high basket drawer stack for the kitchen and two 4 high stacks for the sewing room. I bought nylon drawers for the kitchen one and baskets for the sewing room. I also got the plastic divider inserts for all three and the desktops and casters. Once put together they hold quite a lot, and are ideal for some things, but you mustn't overload them! The two in the sewing room are exactly the same hight as my desktops, and will make great perepetetic table tops to add to the working surface for large projects like big bridal skirts and quilts. When I clear the room for guests, they can be wheeled out of the room and parked on the landing. The baskets are part of the Anton range of wardrobe organizers. I also bought a big mirror for the wall so that clients can see their garments and check for fit. Altogether I bought: 2 low frames 1 tall frame 6 nylon drawers 8 basket drawers 3 desktops 3 sets of casters 6 organizer inserts 1 long mirror and spent £115. Not bad at all. The nylon drawers are neat: white nylon fabric with a stiffened base on a metal frame, velcroed on. The base and frame an be removed and the fabric drawers washed in the machine! If the fabric wears out and they no longer do them, I can cake one and make a pattern and sew up new drawers in fancy curtain fabric! I started my tidy-up at 11 am, took breaks for meals and the occasional cup of tea, and went to bed at 4.15 am... I'm not finished yet! Sounds like wonderful fun and good choices. You'll be so organized and equipped! We don't have an IKEA in this area, so I'm a bit jealous. ;-) -- Joanne @ stitches @ singerlady.reno.nv.us http://bernardschopen.tripod.com/ Life is about the journey, not about the destination. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
OT - Story - Clothes that are whiter than white | Kathy N-V | Beads | 3 | January 9th 05 12:06 AM |
fs&fa FOR QUILT PIECING, Doll Clothes Piecing, Children Clothes Piecing – FINEST IRON AVAILABLE AT ANY PRICE! | singer_fw_iron_lover | Marketplace | 1 | August 9th 04 11:10 PM |
Installing a mailslot on the door - which piece goes inside? | Cathy Weeks | Doll Houses | 0 | April 15th 04 06:00 PM |
HOW TO TURN $6 INTO $6000 | AnthonyT12341234 | Marketplace | 0 | January 5th 04 11:24 PM |