A crafts forum. CraftBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » CraftBanter forum » Craft related newsgroups » Glass
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Melting methods of Fused Cast AZS Block



 
 
Thread Tools Display Modes
  #1  
Old December 14th 15, 10:44 AM posted to rec.crafts.glass
refractory
external usenet poster
 
Posts: 7
Default Melting methods of Fused Cast AZS Block

Melting methods of Fused Cast AZS Block Fused cast AZS block is also called
fusion cast AZS block and fused cast Al2O3-ZrO2-SiO2 block. AZS is the
abbreviation of Al2O3, ZrO2 and SiO2.

Fused cast AZS block is composed of 50%-70% Al2O3, 20%-40% ZrO2 and a small
amount of SiO2 and other components. Based on the ZrO2 content, it can be
divided into AZS 33#, AZS36# and AZS 41#. The most commonly used is AZS 33#,
which has a density of 3.1-3.4g/cm3 and maximum service temperature of 1700
degree.

Based on the position of the electrode, the melting methods of fused cast AZS
can be classified into the reducing method and the oxidizing method. The
electrode of the reducing method is inserted into the melt, while the
electrode of the oxidizing method is over the liquid level.

Products made by different methods have different mineral composition as well
as different proportions and different content of reducing substances (C, H) .
All these will affect the exudation temperature exudation amount of glass
phase.

Now most manufacturers adopt the oxidizing method, since it can reduce the
carbon content to 0.003%-0.006% by long arc melting and blowing oxygen to the
melt. Compared to the reducing method, it can produce fused cast AZS block
with higher corrosion resistance to molten glass and higher exudation
temperature.

Zhengzhou Sunrise is a refractory supplier from China, specializing in various
refractories for glass furnaces, such as fused cast AZS, fused cast high
zircon block, etc..

--


Ads
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How To Prolong The Service Life of Fused Cast AZS Sidewall Block refractory Glass 0 July 6th 15 10:44 AM
Wear Of Fused Cast AZS Block In The Superstructure And Crown Sunriserefractory Glass 0 June 9th 15 10:53 AM
knithink ...when cast on hand stops cast on stitches ,,, Mirjam Bruck-Cohen Yarn 2 November 13th 07 01:12 PM
Blown, Cast, and Fused Contemporary Glass Sculpture from Holsten Galleries H.Atterbury Beads 2 October 19th 04 03:18 AM
Blown, Cast, and Fused Contemporary Glass Sculpture from Holsten Galleries H.Atterbury Glass 0 October 18th 04 11:34 PM


All times are GMT +1. The time now is 05:46 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CraftBanter.
The comments are property of their posters.