A crafts forum. CraftBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » CraftBanter forum » Textiles newsgroups » Quilting
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Mega quilter problems



 
 
Thread Tools Display Modes
  #1  
Old November 20th 13, 02:55 PM posted to rec.crafts.textiles.quilting
[email protected]
external usenet poster
 
Posts: 1
Default Mega quilter problems

I recently purchased a used, but almost new, Viking mega quilter. It is skipping stitches and the thread keeps breaking. I have adjusted both tensions, and re-threaded, adjust the frame,it sews good for a minute, then the thread breaks or skips stitches. It is driving me crazy...I am new to quilting, so any help would be greatly appreciated. Thanks

Dora
Ads
  #3  
Old November 20th 13, 11:01 PM posted to rec.crafts.textiles.quilting
Patricia Storey
external usenet poster
 
Posts: 53
Default Mega quilter problems

In article ,
says...

I recently purchased a used, but almost new, Viking mega quilter. It is skipping stitches and the thread keeps breaking. I have adjusted both tensions, and re-threaded, adjust the frame,it sews good for a minute, then the thread breaks or skips stitches. It is driving me crazy...I am new to quilting, so any help would be greatly appreciated. Thanks

Dora


What kind of needle are you using?
If you are new to quilting, you might be using a Universal needle? This
has a rounded end. If you try a more sharply pointed needle that might
help? I agree with Hanne about the thread - some just does that! Are
you using cotton or polyester or a mix? It will be worth trying a few
combinations. Also, is the bobbin thread the same or similar to the top
thread? That sometimes makes a difference.
Have you checked under the bobbin to make sure there is no fluff?
All sorts of things can cause your symptoms (unfortunately, as it means
lots of checking ...).
Good luck .
Oh - are you piecing or quilting when the thread breaks?
If you are quilting, the tension should be reduced. Some machines like
this to be almost zero.
Also, if you are quilting, the thread might be 'shredding' on the fabric
....
So, sorry, there are all sorts of reasons. Mine usually works again
after I've tried all the above + plus checking that I've got the correct
foot on...
It might have to go to the SM doctor's if all the above offer no
improvement.

Pat on the green
  #4  
Old November 21st 13, 05:00 PM posted to rec.crafts.textiles.quilting
Taria
external usenet poster
 
Posts: 432
Default Mega quilter problems

I got some of those topstitch needles and quilting with them so far has gone
very
well. Worth a try.
Taria

"Patricia Storey" wrote in message
...

In article ,
says...

I recently purchased a used, but almost new, Viking mega quilter. It is
skipping stitches and the thread keeps breaking. I have adjusted both
tensions, and re-threaded, adjust the frame,it sews good for a minute,
then the thread breaks or skips stitches. It is driving me crazy...I am
new to quilting, so any help would be greatly appreciated. Thanks

Dora


What kind of needle are you using?
If you are new to quilting, you might be using a Universal needle? This
has a rounded end. If you try a more sharply pointed needle that might
help? I agree with Hanne about the thread - some just does that! Are
you using cotton or polyester or a mix? It will be worth trying a few
combinations. Also, is the bobbin thread the same or similar to the top
thread? That sometimes makes a difference.
Have you checked under the bobbin to make sure there is no fluff?
All sorts of things can cause your symptoms (unfortunately, as it means
lots of checking ...).
Good luck .
Oh - are you piecing or quilting when the thread breaks?
If you are quilting, the tension should be reduced. Some machines like
this to be almost zero.
Also, if you are quilting, the thread might be 'shredding' on the fabric
....
So, sorry, there are all sorts of reasons. Mine usually works again
after I've tried all the above + plus checking that I've got the correct
foot on...
It might have to go to the SM doctor's if all the above offer no
improvement.

Pat on the green

  #5  
Old December 15th 13, 05:28 PM posted to rec.crafts.textiles.quilting
Jo Pender[_2_]
external usenet poster
 
Posts: 4
Default Mega quilter problems

I have had a Mega Quilter for a few years and despite going back to the maker for new tension unit and a service, I cannot get it to sew reliably, particularly free machine quilting. To be honest I have given up and am starting to hand quilt if I want a pattern. It takes longer but it's not as frustrating. Sorry I can't be more help, but don't assume it is you. It might be worth checking with an engineer.
  #6  
Old March 28th 14, 01:22 PM posted to rec.crafts.textiles.quilting
[email protected]
external usenet poster
 
Posts: 1
Default Mega quilter problems

On Wednesday, November 20, 2013 7:55:38 AM UTC-6, wrote:
I recently purchased a used, but almost new, Viking mega quilter. It is skipping stitches and the thread keeps breaking. I have adjusted both tensions, and re-threaded, adjust the frame,it sews good for a minute, then the thread breaks or skips stitches. It is driving me crazy...I am new to quilting, so any help would be greatly appreciated. Thanks



Dora


I was having the same problems, and it was the needle. Every quilt deserves a new needle. It needs to be sharp and big to make the hole and not shred your thread. So, every project you need to thing about your thread size if your quilting or piecing and also if you have the cruise control or not. The sewing machine lady at Joann's is usually very helpful.
  #7  
Old April 12th 14, 04:40 AM posted to rec.crafts.textiles.quilting
[email protected]
external usenet poster
 
Posts: 1
Default Mega quilter problems

On Wednesday, November 20, 2013 5:55:38 AM UTC-8, wrote:
I recently purchased a used, but almost new, Viking mega quilter. It is skipping stitches and the thread keeps breaking. I have adjusted both tensions, and re-threaded, adjust the frame,it sews good for a minute, then the thread breaks or skips stitches. It is driving me crazy...I am new to quilting, so any help would be greatly appreciated. Thanks



Dora


I use only silk covered cotton thread and it seems to help. This machine is annoying sometimes and very touchy I find. I also can never remember how to thread it because it is so difficult.
  #8  
Old June 10th 14, 09:31 PM posted to rec.crafts.textiles.quilting
[email protected]
external usenet poster
 
Posts: 2
Default Mega quilter problems

On Wednesday, November 20, 2013 7:55:38 AM UTC-6, wrote:
I recently purchased a used, but almost new, Viking mega quilter. It is skipping stitches and the thread keeps breaking. I have adjusted both tensions, and re-threaded, adjust the frame,it sews good for a minute, then the thread breaks or skips stitches. It is driving me crazy...I am new to quilting, so any help would be greatly appreciated. Thanks



Dora


  #9  
Old June 10th 14, 09:33 PM posted to rec.crafts.textiles.quilting
[email protected]
external usenet poster
 
Posts: 2
Default Mega quilter problems

On Tuesday, June 10, 2014 3:31:32 PM UTC-5, wrote:
On Wednesday, November 20, 2013 7:55:38 AM UTC-6, wrote:

I recently purchased a used, but almost new, Viking mega quilter. It is skipping stitches and the thread keeps breaking. I have adjusted both tensions, and re-threaded, adjust the frame,it sews good for a minute, then the thread breaks or skips stitches. It is driving me crazy...I am new to quilting, so any help would be greatly appreciated. Thanks



I have used my mega quilter for many quilts but suddenly I have the same problem. the thread keeps breaking It is like it is getting snagged on something. It is very frustration. I do not know what to do. I will try the topstich needle.




Dora


  #10  
Old May 20th 16, 02:59 PM posted to rec.crafts.textiles.quilting
[email protected]
external usenet poster
 
Posts: 1
Default Mega quilter problems

On Wednesday, November 20, 2013 at 5:55:38 AM UTC-8, wrote:
I recently purchased a used, but almost new, Viking mega quilter. It is skipping stitches and the thread keeps breaking. I have adjusted both tensions, and re-threaded, adjust the frame,it sews good for a minute, then the thread breaks or skips stitches. It is driving me crazy...I am new to quilting, so any help would be greatly appreciated. Thanks

Dora


I also bought a used, well cared for Mega Quilter - owner is a friends, and I trust her in the fact she has had this machine serviced. I did a small project first, didn't have any problems ... now I've got a full size quilt on the frame and the thread keeps breaking. I've changed the needle, I'm using good quality thread ... I sew for just a few inches and thread breaks .... I'm going to check and make sure I put the bobbin in correctly. Best to all my quilter siblings. Lois.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Husqvarna/Viking Mega Quilter rockytop Quilting 3 August 1st 11 04:07 PM
Mega Quilter charick Quilting 0 May 25th 09 10:21 PM
Husqvarna/Viking Mega Quilter` cbond Quilting 4 April 3rd 09 11:25 PM
Mega Quilter User guide... help needed Jo P Quilting 8 August 27th 07 03:25 PM
Viking Mega Quilter KittyG Quilting 5 December 19th 05 06:00 AM


All times are GMT +1. The time now is 12:46 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CraftBanter.
The comments are property of their posters.