If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
how do I refresh contact cement
Hello Everybody!
I once heard of a tip to "refresh" contact cement. Does anyone know what I can add to the contact cement which is almost dried up in my bottles? Thanks for your help! |
Ads |
#2
|
|||
|
|||
why you asked in this group i can't figure out, but a little bit of acetone
will work. "Jeff" wrote in message . ca... Hello Everybody! I once heard of a tip to "refresh" contact cement. Does anyone know what I can add to the contact cement which is almost dried up in my bottles? Thanks for your help! |
#3
|
|||
|
|||
There's real big difference between "contact" cement and "rubber" cement.
Contact cement is what you use to adhere Formica to wood to make counter tops. I hardly imagine you'd be using that to adhere a pattern to glass. And, rubber cement is so cheap, why would you want to waste the time to re-disolve any that had dried up? Just chunk it and open a new bottle. "Jeff" wrote in message ... I asked in this group because I use rubber cement at times for my stained glass patterns. I didnt know it was wrong to ask! "Charlie Spitzer" wrote in message ... why you asked in this group i can't figure out, but a little bit of acetone will work. "Jeff" wrote in message . ca... Hello Everybody! I once heard of a tip to "refresh" contact cement. Does anyone know what I can add to the contact cement which is almost dried up in my bottles? Thanks for your help! |
#4
|
|||
|
|||
yep,
contact cement is basically for laminates......smear one side of each unit, position it CAREFULLY and stick together rubber cement is for a "temporary" adhesion and removable M is right.......buy some new stuff..keep it TIGHTLY closed h -- In the words of the IMMORTAL USED CAR DEALER: THERE IS AN ASS FOR EVERY SEAT! |
#5
|
|||
|
|||
You are right...first, it was the rubber cement I was inquiring about, I
should of been more specific. Secondly, I have three full bottles of the rubber cement which are rather stiff and wanted to know if there was some way that I can "refresh" the glue. Thanks to all that offered help! Jeff "Howard" wrote in message ... yep, contact cement is basically for laminates......smear one side of each unit, position it CAREFULLY and stick together rubber cement is for a "temporary" adhesion and removable M is right.......buy some new stuff..keep it TIGHTLY closed h -- In the words of the IMMORTAL USED CAR DEALER: THERE IS AN ASS FOR EVERY SEAT! |
#6
|
|||
|
|||
On Sat, 23 Aug 2003 21:28:25 GMT, "Jeff" wrote:
You are right...first, it was the rubber cement I was inquiring about, I should of been more specific. Secondly, I have three full bottles of the rubber cement which are rather stiff and wanted to know if there was some way that I can "refresh" the glue. Thanks to all that offered help! Naptha gas (camp stove fuel) will thin rubber cement. |
#7
|
|||
|
|||
Tolune
but, just buy more rubber cement, its cheaper and safer. gary wrote in message ... On Sat, 23 Aug 2003 21:28:25 GMT, "Jeff" wrote: You are right...first, it was the rubber cement I was inquiring about, I should of been more specific. Secondly, I have three full bottles of the rubber cement which are rather stiff and wanted to know if there was some way that I can "refresh" the glue. Thanks to all that offered help! Naptha gas (camp stove fuel) will thin rubber cement. |
#8
|
|||
|
|||
yeah, toluene is the ingredient in glues that gets one high if sniffed.
Working with that may be more than you bargained for! m "Gary Owens" wrote in message om... Tolune but, just buy more rubber cement, its cheaper and safer. gary wrote in message ... On Sat, 23 Aug 2003 21:28:25 GMT, "Jeff" wrote: You are right...first, it was the rubber cement I was inquiring about, I should of been more specific. Secondly, I have three full bottles of the rubber cement which are rather stiff and wanted to know if there was some way that I can "refresh" the glue. Thanks to all that offered help! Naptha gas (camp stove fuel) will thin rubber cement. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
OT Linda.....Contact me IBS-Pompano | Laurie | Beads | 0 | February 5th 05 08:40 PM |
Hypo Cement and Audio books | Christina Peterson | Beads | 1 | June 14th 04 07:37 PM |
What is watchmaker's cement? Where can I get it in the UK? | Typo | Beads | 17 | March 13th 04 05:44 PM |
Help, need to contact vj | Jalynne | Beads | 0 | November 12th 03 06:24 PM |