If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#21
|
|||
|
|||
Part of it depends on the brand of basting spray. I will *never* again buy
"FastTack" brand of basting spray. It is horrible. But I love 505 and Sullivans. 505 has virtually no odor. Pati, in Phx. wrote: Polly, I have never had trouble with gummy needles when using spray basting, so I guess you may have "too heavy a hand at spraying". I have had my best results with basting spray. Nancycog in MD |
Ads |
#22
|
|||
|
|||
For the overspray cleanup..... try some rubbing alcohol. (Check any wood finish
first though). Or the product that is now out to clean the adhesive off the hoops for embroidery machines. Pati, in Phx. Shelly wrote: I love the basting spray that I just finished using. Don't remember the name of it but I got it at Wal-Mart. The fabric/batting didn't shuffle around and I didn't have a problem with anything gumming up either. *It did get on my kitchen table and take forever to scrub/wear off though.* I took it outside this last time I used it on a big quilt. Got dh to put up 2 saw horses and 2 full sheets of plywood and I put the quilt out together outside. It will be really nice being able to do this in the fall and spring! I love working outside! No problem at all with the lighting! hehe Shelly wrote in message ... Polly, I have never had trouble with gummy needles when using spray basting, so I guess you may have "too heavy a hand at spraying". I have had my best results with basting spray. Nancycog in MD --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.514 / Virus Database: 312 - Release Date: 8/28/03 |
#23
|
|||
|
|||
Sounds lovely to be working on a quilt outside in nice weather.
For winter when you are back indoors....if your basting spray travels onto the table or floor, use rubbing alcohol to get it off. Works fast and much easier than trying to scrub with soap and water! marcella In article , "Shelly" glass angel at charter dot net wrote: I love the basting spray that I just finished using. Don't remember the name of it but I got it at Wal-Mart. The fabric/batting didn't shuffle around and I didn't have a problem with anything gumming up either. *It did get on my kitchen table and take forever to scrub/wear off though.* I took it outside this last time I used it on a big quilt. Got dh to put up 2 saw horses and 2 full sheets of plywood and I put the quilt out together outside. It will be really nice being able to do this in the fall and spring! I love working outside! No problem at all with the lighting! hehe Shelly wrote in message ... Polly, I have never had trouble with gummy needles when using spray basting, so I guess you may have "too heavy a hand at spraying". I have had my best results with basting spray. Nancycog in MD --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.514 / Virus Database: 312 - Release Date: 8/28/03 |
#24
|
|||
|
|||
My table is wood, so I couldn't use alcohol on it. I finally kept scrubbing
and got rid of it but it did take quite a while. Shelly "Pati Cook" wrote in message ... For the overspray cleanup..... try some rubbing alcohol. (Check any wood finish first though). Or the product that is now out to clean the adhesive off the hoops for embroidery machines. Pati, in Phx. Shelly wrote: I love the basting spray that I just finished using. Don't remember the name of it but I got it at Wal-Mart. The fabric/batting didn't shuffle around and I didn't have a problem with anything gumming up either. *It did get on my kitchen table and take forever to scrub/wear off though.* I took it outside this last time I used it on a big quilt. Got dh to put up 2 saw horses and 2 full sheets of plywood and I put the quilt out together outside. It will be really nice being able to do this in the fall and spring! I love working outside! No problem at all with the lighting! hehe Shelly wrote in message ... Polly, I have never had trouble with gummy needles when using spray basting, so I guess you may have "too heavy a hand at spraying". I have had my best results with basting spray. Nancycog in MD --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.514 / Virus Database: 312 - Release Date: 8/28/03 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.514 / Virus Database: 312 - Release Date: 8/28/03 |
#25
|
|||
|
|||
I've never had any trouble with the basting spray gumming up the needle
either, though sometimes the sticky edges have left a little residue on the body of my machine, but that comes off pretty easily with a bit of rubbing alcohol. I really like how it holds everything together while quilting, as well as how quickly I can baste a quilt with it. I like to do it out on my patio because of the odor and flammability. I spread an old sheet on the patio for a drop cloth and then work on the sheet. I have used the June Tailor spray and 3M basting spray; both of those are flammable, so I always use those outside. If I have to work inside because of weather, I use the Sulky KK2000. It's a bit more expensive but is non-flammable and doesn't have quite as much odor. It does say to use with adequate ventilation, so when I do it inside, I spread my old sheet on the kitchen floor and turn on the exhaust fan over the stove. I prefer to work outside if I can because my kitchen is small and I have more room on the patio. I thought the 3M spray seemed a little stickier than the other 2 kinds, but I have only used it once and maybe sprayed it a little more heavily than I would have had to. Julia in MN -- This message has been scanned for viruses by Norton Anti-Virus http://mail.chartermi.net/~jaccola/ |
#26
|
|||
|
|||
|
#27
|
|||
|
|||
Something oily also often works to take off something like that, so an
oily furniture polish or even baby oil might have taken it off your wooden table. Next time, put an old sheet or something like that on the table before you spread out your quilt. Julia in MN -- This message has been scanned for viruses by Norton Anti-Virus http://mail.chartermi.net/~jaccola/ |
#28
|
|||
|
|||
Hi, Julie, I have used fleece on only one quilt, and found that it
stretches easily. I would highly recommend using a walking foot if you intend to SITD, as I did. I also quilted first, then bound the edge as usual. It turned out nice and cozy, but don't think I will use it again, unless it is a tied quilt. Come to think of it, it was made before I found spray basting. That may make it easier to control. Nancycog in MD Juile, I've tied one pieced top with fleece backing and my daughter loves it. However, between the stretchy fleece, heavy use, and perhaps less than 1/4 inch seams, multiple seams have pulled out and required remedial treatment. Just something to keep in mind! Cathy in rainy Richmond Thanks again for these observations. I don't know if my sister has a walking foot for her brand new machine- but I know to make her buy one I use mine all the time- and not just for quilting projects. I will suggest spray basting (and maybe a few pins too) to help her out during quilting it. Now that I know about your DD's quilt, I really am going to suggest she quilt this quilt to add stability to the block seams. Since this is her first quilt- I am not sure her seam allowances will be perfect. I know that she expects to use it on her bed- which means medium to heavy use. Thanks again everyone! Julie Richmond, VA |
#29
|
|||
|
|||
For all of your ideas, thoughts, questions and experiences, thank you so
much. Ladies of the Cloth, this has been such a helpful discussion. You are wonderful. I appreciate you. Polly |
#30
|
|||
|
|||
"Ladies of the Cloth"--I love it!
Betty "Polly Esther" wrote in message hlink.net... For all of your ideas, thoughts, questions and experiences, thank you so much. Ladies of the Cloth, this has been such a helpful discussion. You are wonderful. I appreciate you. Polly |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
A question for lampworkers | Diana Curtis | Beads | 42 | May 7th 04 07:26 PM |
Not really an AD, but a marketing question, need advice | Kandice Seeber | Beads | 26 | April 4th 04 10:39 AM |
student quilt update and a question | Joy Quilts | Quilting | 6 | August 21st 03 07:33 PM |
de-lurking with a color question | Jennifer Moore | Beads | 8 | August 16th 03 09:42 PM |