If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Let's talk about irons . . . .
Remember when a bunch of us bought the "technicolor" irons? Well,
mine just died. Now I need some suggestions for a new iron. My old, old Rowenta spits and sputters (yes, I know Sandy/Ragmop you don't put water in your irons, but I do!), so now I need to start shopping for a new iron. I haven't kept up on what's good or bad since my technicolor has, up until today, worked fine. Suggestions, recommendations, anyone? Donna in Idaho |
Ads |
#2
|
|||
|
|||
Let's talk about irons . . . .
I had an $8 Rowenta that I bought from the thrift store that lasted more
than a few years. It was wonderful but it died a year or so ago. I replaced it with a new Rowenta from Costco. (about $70) The darned thing leaked a bit (I use water too) but was pretty usable until last month. It had the usual turn off after sitting idle. I had forgotten it on in the afternoon and when I was closing down the house for the evening I knew it hadn't been moved in hours and went to pick it up. The shut off had failed and when I grabbed it I got a couple of big blisters. I returned it to Costco the next day and bought their Shark model. It isn't a 'wow' iron but is ok so far. If it fails in an unreasonable time Costco will refund my money. Can't complain about that. It was a pretty reasonable price. Someone at guild last month said she gave up on pricey irons and was enjoying her working $9 walmart one. ymmv Taria "Donna Aten" wrote in message ... Remember when a bunch of us bought the "technicolor" irons? Well, mine just died. Now I need some suggestions for a new iron. My old, old Rowenta spits and sputters (yes, I know Sandy/Ragmop you don't put water in your irons, but I do!), so now I need to start shopping for a new iron. I haven't kept up on what's good or bad since my technicolor has, up until today, worked fine. Suggestions, recommendations, anyone? Donna in Idaho |
#3
|
|||
|
|||
Let's talk about irons . . . .
In article ,
Donna Aten wrote: Remember when a bunch of us bought the "technicolor" irons? Well, mine just died. Now I need some suggestions for a new iron. My old, old Rowenta spits and sputters (yes, I know Sandy/Ragmop you don't put water in your irons, but I do!), so now I need to start shopping for a new iron. I haven't kept up on what's good or bad since my technicolor has, up until today, worked fine. Suggestions, recommendations, anyone? Donna in Idaho I use water in my irons too :-) My current model is a T-fal ultraglide. It has a nice slick sole plate and a nice weight to it. I've had it about 4 years and it's still going strong. It does have auto-shutoff which I am not a huge fan of, but I've gotten more or less used to it. Got mine at Bed Bath & Beyond. I think it's a pretty widely available brand though. marcella |
#4
|
|||
|
|||
Let's talk about irons . . . .
My DH bought me the most expensive iron, a Shark, at WalMart as a Xmas
gift...not for ironing, of course, but for quilting. It had the automatic shut-off which I hate! It always seemed to shut off just when I needed it, but other times when I wasn't using it, I'd hear it cycling off and on! About the same time, I bought the cheapest iron that they had to take to a Quilting Retreat. It was small and light. As it turns out, the better iron spit steaming hot water everywhere...it was a major hazzard. I put it away and started to use the inexpensive one...I love it. It's so light, steams well, and does a great job. I'm happy with it. It's a Procter-Silex Traditions. -- Alice in PA http://community.webshots.com/user/twosonsatpsu "Taria" wrote in message ... I had an $8 Rowenta that I bought from the thrift store that lasted more than a few years. It was wonderful but it died a year or so ago. I replaced it with a new Rowenta from Costco. (about $70) The darned thing leaked a bit (I use water too) but was pretty usable until last month. It had the usual turn off after sitting idle. I had forgotten it on in the afternoon and when I was closing down the house for the evening I knew it hadn't been moved in hours and went to pick it up. The shut off had failed and when I grabbed it I got a couple of big blisters. I returned it to Costco the next day and bought their Shark model. It isn't a 'wow' iron but is ok so far. If it fails in an unreasonable time Costco will refund my money. Can't complain about that. It was a pretty reasonable price. Someone at guild last month said she gave up on pricey irons and was enjoying her working $9 walmart one. ymmv Taria "Donna Aten" wrote in message ... Remember when a bunch of us bought the "technicolor" irons? Well, mine just died. Now I need some suggestions for a new iron. My old, old Rowenta spits and sputters (yes, I know Sandy/Ragmop you don't put water in your irons, but I do!), so now I need to start shopping for a new iron. I haven't kept up on what's good or bad since my technicolor has, up until today, worked fine. Suggestions, recommendations, anyone? Donna in Idaho |
#5
|
|||
|
|||
Let's talk about irons . . . .
On Sun, 04 Dec 2011 12:23:56 -0700, Donna Aten wrote:
Remember when a bunch of us bought the "technicolor" irons? Well, mine just died. Now I need some suggestions for a new iron. My old, old Rowenta spits and sputters (yes, I know Sandy/Ragmop you don't put water in your irons, but I do!), so now I need to start shopping for a new iron. I haven't kept up on what's good or bad since my technicolor has, up until today, worked fine. Suggestions, recommendations, anyone? Donna in Idaho I've got a Black and Decker Classic. The auto shutoff does drive me bonkers. You will frequently hear me swearing that I am going to get a brazier and a flat iron while I am sewing. Other than that it has worked fine for years. I picked it up after my ancient GE died back when they thought it a good idea to sell irons with no nose. The B&D had a nose, in fact aside from a cheapo Sunbeam I also bought it was the only one I found at the time that did. The cheapo Sunbeam also still works. It just had it's temperature selector broken off when a cat knocked it off the ironing board. I turned it all the way up with a pair of pliers and only use it for cottons and linen now. Alas! I have never put water in either of them, so I cannot say how well they work or how long they last when you do. NightMist -- I'm raising a developmentally disabled child. What's your superpower? |
#6
|
|||
|
|||
Let's talk about irons . . . .
Howdy!
Love you, Donna! ;-D You're right, no water in my irons, & no wrinkles w/ a spray bottle of water at hand. For hard work, lots of heat, I like the Sunbeam series C2. Got it in white, then picked up a black one for a spare (great sale price). They run $20-$25. And, just to be more contrary, I love the auto shut-off; thank god!!! for auto shut-off. Sunbeam's a. s-o isn't goofy; it stays on for about 15 minutes when untouched; most times I'm ironing, I'm using it much more often than that, so the shut-off isn't an issue. But, should I forget about the iron, nice to have it put itself to sleep. Sunbeam's been around forever. Had one for 8 yrs before I dropped it; no telling how long it would have kept going. g I figure it's good to get a new iron every few yrs, just for an "improved" possibility. Good luck! Ragmop/Sandy On 12/4/11 1:23 PM, in article , "Donna Aten" wrote: Remember when a bunch of us bought the "technicolor" irons? Well, mine just died. Now I need some suggestions for a new iron. My old, old Rowenta spits and sputters (yes, I know Sandy/Ragmop you don't put water in your irons, but I do!), so now I need to start shopping for a new iron. I haven't kept up on what's good or bad since my technicolor has, up until today, worked fine. Suggestions, recommendations, anyone? Donna in Idaho |
#7
|
|||
|
|||
Let's talk about irons . . . .
Ragmop/Sandy,
Love you too as long as we can disagree on irons with or without water! :-) My technicolor iron had an automatic shut-off and I didn't mind it at all. It heated up pretty fast and if I was ironing lots of fabric (which is usually how I iron fabric - in marathon sessions) it never had the chance to shut itself off. I'll check out the Sunbeam irons. Thanks for all the suggestions everyone. My next project is tote bags for two little great-granddaughters - one three yo & one 17 months old. Donna in Idaho On Sun, 04 Dec 2011 22:47:48 -0600, Sandy E wrote: Howdy! Love you, Donna! ;-D You're right, no water in my irons, & no wrinkles w/ a spray bottle of water at hand. For hard work, lots of heat, I like the Sunbeam series C2. Got it in white, then picked up a black one for a spare (great sale price). They run $20-$25. And, just to be more contrary, I love the auto shut-off; thank god!!! for auto shut-off. Sunbeam's a. s-o isn't goofy; it stays on for about 15 minutes when untouched; most times I'm ironing, I'm using it much more often than that, so the shut-off isn't an issue. But, should I forget about the iron, nice to have it put itself to sleep. Sunbeam's been around forever. Had one for 8 yrs before I dropped it; no telling how long it would have kept going. g I figure it's good to get a new iron every few yrs, just for an "improved" possibility. Good luck! Ragmop/Sandy |
#8
|
|||
|
|||
Let's talk about irons . . . .
I'm almost embarassed to admit it, but my best iron is a GE steam iron
my mother gave me to take to college with me. That was in the fall of 1966, and it still works beautifully. For very small quick jobs I have a small, lightweight Black and Decker, and it works fine for those. After all the horror stories about the new and very expensive irons, I just count my lucky stars and am careful not to drop my good old GE! |
#9
|
|||
|
|||
Let's talk about irons . . . .
Now that's a treasure. If I were you, I'd keep it in a safe deposit box.
Please do not drop your iron. Polly "Mary" wrote in message ... I'm almost embarassed to admit it, but my best iron is a GE steam iron my mother gave me to take to college with me. That was in the fall of 1966, and it still works beautifully. For very small quick jobs I have a small, lightweight Black and Decker, and it works fine for those. After all the horror stories about the new and very expensive irons, I just count my lucky stars and am careful not to drop my good old GE! |
#10
|
|||
|
|||
Let's talk about irons . . . .
Yeah, but Polly - how's she going to use the iron if it's locked up in
a safety deposit box? Donna in Idaho On Mon, 5 Dec 2011 00:27:10 -0600, "Polly Esther" wrote: Now that's a treasure. If I were you, I'd keep it in a safe deposit box. Please do not drop your iron. Polly "Mary" wrote in message ... I'm almost embarassed to admit it, but my best iron is a GE steam iron my mother gave me to take to college with me. That was in the fall of 1966, and it still works beautifully. For very small quick jobs I have a small, lightweight Black and Decker, and it works fine for those. After all the horror stories about the new and very expensive irons, I just count my lucky stars and am careful not to drop my good old GE! |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Irons advice | dogmom | Quilting | 12 | May 27th 08 12:57 AM |
Irons, again... | Mickie Swall | Quilting | 27 | April 12th 08 03:13 PM |
irons | joysjane | Quilting | 17 | October 26th 04 02:57 AM |
Old Fashioned Irons! | Marcella Tracy Peek | Quilting | 9 | January 13th 04 09:53 PM |
Cleaning Irons | Brian Christiansen | Quilting | 6 | November 23rd 03 06:07 PM |