If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Unlurking, part 2
Y'all were so helpful the last time I posted that I can't resist going to the
well again ;-) Since last we typed, I've amassed quite a collection of books, pamphlets, patterns, transfers, floss/thread and yarn/wool that are crying out to be used. They'll have to wait awhile as I want to take the time to learn a few things before tackling a real project. Here's my question: what do products do you use/recommend as alternatives to hoops? Specifically, I'm looking for something that would enable a mechanically challenged klutz like me to work on borders of large-ish 'canvases'. IOW, it has to be easily assembled. Thanks much Anne |
Ads |
#2
|
|||
|
|||
I like Q-Snaps, they come in a variety of sizes, so it should be
possible to get one just the size you need. I would suggest at least three inch margin for your fabric. The stocking I am currently working on (won't be done for Christmas :'( ) is a kit and the fabric margin is tight making it harder to do the stitching at the edge of the design. For my next project I'm going to try scroll bars because the one after that is a big one that Q-Snaps aren't large enough without using them like hoops and moving them around the fabric. John tennhick wrote: Y'all were so helpful the last time I posted that I can't resist going to the well again ;-) Since last we typed, I've amassed quite a collection of books, pamphlets, patterns, transfers, floss/thread and yarn/wool that are crying out to be used. They'll have to wait awhile as I want to take the time to learn a few things before tackling a real project. Here's my question: what do products do you use/recommend as alternatives to hoops? Specifically, I'm looking for something that would enable a mechanically challenged klutz like me to work on borders of large-ish 'canvases'. IOW, it has to be easily assembled. Thanks much Anne |
#3
|
|||
|
|||
tennhick wrote:
something that would enable a mechanically challenged klutz like me to work on borders of large-ish 'canvases'. IOW, it has to be easily assembled. Canvas as in actual "mesh" canvas (mono, penelope, et al) OR Canvas as in "empty surface on which to stitch that is NOT canvas". (big smile) The first requires a frame. You'll get lots of advice on that score, and John Quinn has already supplied his answer to the question. If you mean normal "cloth" for "classic" embroidery (oooooh, I'm gonna hear it on the use of THAT word, but I couldn't resist), then a tambour hoop might be just the thing for you if you want something larger than a normal mid-size hoop. 5 or 6 inches is the most I like to use "in hand" - otherwise your hand can't take it for long. A LOT of embroidery can be done without any object holding it. It just depends upon what you are doing and what you get "comfortable" doing. Some embroidery emphatically needs something holding it. So, we need to know what you're doing to answer your question. :-) Good luck! Dianne |
#4
|
|||
|
|||
John Quinn said
I like Q-Snaps, they come in a variety of sizes, so it should be possible to get one just the size you need. I would suggest at least three inch margin for your fabric. The stocking I am currently working on (won't be done for Christmas :'( ) is a kit and the fabric margin is tight making it harder to do the stitching at the edge of the design. For my next project I'm going to try scroll bars because the one after that is a big one that Q-Snaps aren't large enough without using them like hoops and moving them around the fabric. Thanks, John. I've been ogling those thingies for awhile. I did try a scroll bar set once but was appalled when after threading the cloth through the slot, a residue of teeny wood shavings embellished the cloth. Anne |
#5
|
|||
|
|||
Dianne Lewandowski said
I did enclose 'canvas' in quotes so "Canvas as in "empty surface on which to stitch that is NOT canvas" is right on target ;-) The first requires a frame. LIGHT BULB GOES OFF -- I could staple fabric on the back of a large frame. If you mean normal "cloth" for "classic" embroidery (oooooh, I'm gonna hear it on the use of THAT word, but I couldn't resist), then a tambour hoop might be just the thing for you if you want something larger than a normal mid-size hoop. 5 or 6 inches is the most I like to use "in hand" - otherwise your hand can't take it for long. gulp I don't know what you mean by 'in hand.' For large pieces I've been using a 14" quilter's hoop of cloth but that doesn't help much if I want to have access in one fell swoop to what'll be the edges on a large piece. FWIW, I balance it on the side of an arm chair. Good luck! Thanks ... I need more than luck -- so many ideas, so little talent Anne |
#6
|
|||
|
|||
Anne,
I also swear by Q-snaps. they are so light and simple to use. However, I don't do needlepoint, only cross-stitch. Gillian "tennhick" wrote in message ganews.com... John Quinn said I like Q-Snaps, they come in a variety of sizes, so it should be possible to get one just the size you need. I would suggest at least three inch margin for your fabric. The stocking I am currently working on (won't be done for Christmas :'( ) is a kit and the fabric margin is tight making it harder to do the stitching at the edge of the design. For my next project I'm going to try scroll bars because the one after that is a big one that Q-Snaps aren't large enough without using them like hoops and moving them around the fabric. Thanks, John. I've been ogling those thingies for awhile. I did try a scroll bar set once but was appalled when after threading the cloth through the slot, a residue of teeny wood shavings embellished the cloth. Anne |
#7
|
|||
|
|||
tennhick wrote:
something that would enable a mechanically challenged klutz like me to work on borders of large-ish 'canvases'. IOW, it has to be easily assembled.(snip) The first requires a frame (snip) A LOT of embroidery can be done without any object holding it. I, too, was born and brought up "across the pond". When we little girls were first taught embroidery, we were not allowed hoops, everything had to be done "in hand". I think the theory was that we had to learn how to manipulate needle and threads so that we got the right tension unaided. Nowadays I use hoops - anything from 4" to 16", depending on the project, but to this day, if I am doing a long row of something like backstitch, stemstitch or chainstitch I flip the work out of the hoop and do it in my hand. Olwyn Mary in New Orleans. |
#8
|
|||
|
|||
Olwynmary said
I, too, was born and brought up "across the pond". When we little girls were first taught embroidery, we were not allowed hoops, everything had to be done "in hand". I think the theory was that we had to learn how to manipulate needle and threads so that we got the right tension unaided. ah, I think I now know what 'in hand' means -- thanks ;-) Anne |
#9
|
|||
|
|||
Actually, 14-inch quilter's hoops are way too large to handle embroidery
in my personal opinion. Your hand gets too tired. It's unwieldy. Harder to pull up to your nose when your eyes get tired, or there's details you need to see - especially with tiny stitches. There is a myth about hoops crushing embroidery. They don't. And as Olwynmary pointed out, a LOT of embroidery is easier and more precise if done in hand. Stitches such as chain and stem (for instance) are easier to handle without hoops or frames, because you can't do them when fabric is drum type. You use the "sewing" method for these stitches. Sewing method means you go in/out with the needle in one motion, as opposed to using two hands, one underneath (which is the stab method). Except for some exceptional fabrics (which I've used), you can't do this (normally) in a drum-tight situation. Bottom line: use a smaller hoop and move it to where you need it. Or, when you *really* need to hold the fabric taut, get a tambour hoop. And for both these, bind them. Yes, large pieces like table cloths means you will have lots of fabric hanging around you. You learn to work with it. For those reading this aghast with my statements: I'm working on a large pulled work piece and it's been entirely worked in a 6-inch hoop. My tambour hoop is "busy" with something else. You might find some additional help he http://www.heritageshoppe.com/herita.../getstart.html And finally, keep posting, keep asking, keep doing, keep making decisions based on your own comfort level. It all comes in time. Forget the mistakes. Learn and move on. :-) Dianne tennhick wrote: Olwynmary said I, too, was born and brought up "across the pond". When we little girls were first taught embroidery, we were not allowed hoops, everything had to be done "in hand". I think the theory was that we had to learn how to manipulate needle and threads so that we got the right tension unaided. ah, I think I now know what 'in hand' means -- thanks ;-) Anne |
#10
|
|||
|
|||
John Quinn wrote:
I like Q-Snaps, they come in a variety of sizes, so it should be possible to get one just the size you need. I would suggest at least Could be wrong, but I am pretty sure that Q-snap pieces can be combined to make larger frames. Obviously the "snap" parts would still be separate so you might have 2+ to a side, but you can still combine sets to get a larger frame. Barbara |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
HELP!! CAN ANYONE HELP WITH LOST PART OF A PATTERN? | Sue | Needlework | 1 | October 28th 03 05:30 PM |
FAQ Raku part 2 of 2 | SBRANFPOTS | Pottery | 0 | October 21st 03 02:13 PM |
FAQ Raku part 1 of 2 | SBRANFPOTS | Pottery | 0 | October 21st 03 02:12 PM |
FAQ Raku part 2 of 2 | SBRANFPOTS | Pottery | 0 | September 16th 03 11:11 PM |
FAQ Raku part 1 of 2 | SBRANFPOTS | Pottery | 0 | September 16th 03 11:10 PM |