Cherry Wood Thread Cabinet

It's looking wonderful. What beautifully long clamps. Can't wait to
see it all polished/varnished.
..
In message . com, John
writes
On Oct 9, 3:36 pm, John wrote:

Here is a view of the doors glued up and held in place within their
intended opening. After they dry, they will be sanded and the hardware
and pulls installed. Then the varnish is applied, and the back is put
on and this job is done.

http://good-times.webshots.com/photo...00692635UtpOma

John


--
Best Regards
pat on the hill

On Oct 9, 3:36 pm, John wrote:

Here are two more pics showing the cabinet with the door hardware and
pulls installed and the door open.


http://good-times.webshots.com/photo...00692635upfKfV

John

In article . com,
John wrote:

On Oct 9, 3:36 pm, John wrote:

Here are two more pics showing the cabinet with the door hardware and
pulls installed and the door open.


http://good-times.webshots.com/photo...00692635upfKfV

John


Gorgeous, John. I'm glad you got this far with it before I have to leave
-- I was actually hoping it would be completely finished so I could see
it. G Or that you'd decide you didn't really want it and would send it
to me.

--
Sandy in Henderson, near Las Vegas
sw.foster1 (at) gmail (dot) com (remove/change the obvious)
http://www.sandymike.net

On Oct 9, 3:36 pm, John wrote:


Here is a view of the case with the first of many coats of varnish
applied. Sanding in between coats and final waxing still to do and
installation of the doors and back. This project is finally winding
down.


http://good-times.webshots.com/photo...00692635LspKkG

John

Beautiful, just beautiful.
I always used to hate the next bit - it looks so pretty and then you
have to 'mess it up' with the sanding!!
..
In message . com, John
writes
On Oct 9, 3:36 pm, John wrote:


Here is a view of the case with the first of many coats of varnish
applied. Sanding in between coats and final waxing still to do and
installation of the doors and back. This project is finally winding
down.


http://good-times.webshots.com/photo...00692635LspKkG

John


--
Best Regards
pat on the hill

On Oct 9, 3:36 pm, John wrote:

Here is a view of the lower case with three coats of varnish on it. I
will see in the morning if that is sufficient. If so, then it is
polish and wax and carry it upstairs and load it up. If not, then
another coat should do it.

http://good-times.webshots.com/photo...00692635gLAcMa

John

On Oct 9, 3:36 pm, John wrote:

For those of you who have been following this thread, I started
another posting on the forum but you may have missed it. Here is a
picture of the finished case. The last three pictures are of the
cabinet in place and filled with thread, and tapestry yarn in the top
case, and cones, embroidery thread, and serger thread and excess
tapestry yarn in the bottom. This job is now complete. I am very happy
with it and I hope you all like it. It is time to get back to
quilting.




http://good-times.webshots.com/photo...00692635xjRrWP

Thanks for following along on this project,

John

She's a beauty!

--
Kathyl (KJ)
remove "nospam" before mchsi
http://community.webshots.com/user/kathylquiltz
"John" wrote in message
ups.com...
On Oct 9, 3:36 pm, John wrote:

Here is a view of the doors glued up and held in place within their
intended opening. After they dry, they will be sanded and the hardware
and pulls installed. Then the varnish is applied, and the back is put
on and this job is done.

http://good-times.webshots.com/photo...00692635UtpOma

John