If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Anybody remember...
A decade or two ago there was a production cutter advertised in the trade
mags that worked from master templates. It was for repetitive mass cutting, worked on a pantograph like arrangement as I remember. Sort of like a New Hermes Engraver. Seems like the cutter head was actuated by air pressure? What was the name of the thing...and does anybody have one laying around they want to get rid of? |
Ads |
#2
|
|||
|
|||
Anybody remember...
"Moonraker" wrote in message ... A decade or two ago there was a production cutter advertised in the trade mags that worked from master templates. It was for repetitive mass cutting, worked on a pantograph like arrangement as I remember. Sort of like a New Hermes Engraver. Seems like the cutter head was actuated by air pressure? What was the name of the thing...and does anybody have one laying around they want to get rid of? My late brother designed one of these in the early 70's for production lamp work. He gave the thing to Bilco in exchange for 2 prototypes. I had one made for me when I was making lamp kits, and then sold mine years ago. I had a production line with one person making glass strips, the next using the machine to score the shape on them, the next person breaking the pieces out. It was called an Odd Shaped Cutter, and used plexi templates. It used a small compressor to force a cutting head down to score a strip of glass. Unless you're doing alot of repetition, it's not of any practical use. It takes longer to make the templates, and tweak the operation, then it would to cut 100 pieces by hand. I'm pretty sure I lost touch with several folks that still used one over the years, but I'll give it a try. -- JK Sinrod www.SinrodStudios.com www.MyConeyIslandMemories.com |
#3
|
|||
|
|||
Anybody remember...
"Glassman@work" wrote in message news:shv_g.130$%T3.72@trndny03... "Moonraker" wrote in message ... A decade or two ago there was a production cutter advertised in the trade mags that worked from master templates. It was for repetitive mass cutting, worked on a pantograph like arrangement as I remember. Sort of like a New Hermes Engraver. Seems like the cutter head was actuated by air pressure? What was the name of the thing...and does anybody have one laying around they want to get rid of? My late brother designed one of these in the early 70's for production lamp work. He gave the thing to Bilco in exchange for 2 prototypes. I had one made for me when I was making lamp kits, and then sold mine years ago. I had a production line with one person making glass strips, the next using the machine to score the shape on them, the next person breaking the pieces out. It was called an Odd Shaped Cutter, and used plexi templates. It used a small compressor to force a cutting head down to score a strip of glass. Unless you're doing alot of repetition, it's not of any practical use. It takes longer to make the templates, and tweak the operation, then it would to cut 100 pieces by hand. I'm pretty sure I lost touch with several folks that still used one over the years, but I'll give it a try. -- JK Sinrod www.SinrodStudios.com www.MyConeyIslandMemories.com Small world, eh? I have an idea that might entail some serious basement banditry activity. I looked at the Cutters' Mate with the idea of rigging up a "duplicator" but it didn't seem possible. Then I remembered the Bilco.. Do you remember what is the maximum size piece that could be cut? |
#4
|
|||
|
|||
Anybody remember...
"Moonraker" wrote in message .. . Do you remember what is the maximum size piece that could be cut? We used it for lamp pieces, so the throat was probably no bigger than 4-5". The plexi templates were made on 6 x 6's, fit as many as a dozen shapes on each one. -- JK Sinrod www.SinrodStudios.com www.MyConeyIslandMemories.com |
#5
|
|||
|
|||
Anybody remember...
"glassman" wrote in message ... "Moonraker" wrote in message .. . Do you remember what is the maximum size piece that could be cut? We used it for lamp pieces, so the throat was probably no bigger than 4-5". The plexi templates were made on 6 x 6's, fit as many as a dozen shapes on each one. These machines have probably all migrated to the Far East or to basements in Canada, eh? |
#6
|
|||
|
|||
Anybody remember...
Moonraker wrote:
"glassman" wrote in message ... "Moonraker" wrote in message .. . Do you remember what is the maximum size piece that could be cut? We used it for lamp pieces, so the throat was probably no bigger than 4-5". The plexi templates were made on 6 x 6's, fit as many as a dozen shapes on each one. These machines have probably all migrated to the Far East or to basements in Canada, eh? Eh, not all of Canada, just Victoria . . . |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Hug Block.. help me remember.... | Kate G. | Quilting | 8 | January 30th 06 10:19 PM |
ot do you remember when? | A M Schaus | Needlework | 2 | January 8th 04 06:53 AM |
Ot Remember the young girl in the train | Mirjam Bruck-Cohen | Yarn | 7 | November 8th 03 07:52 AM |
Remember!!!! especially newbies OT | Dr. Sooz | Beads | 0 | August 1st 03 09:47 PM |