If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Custom Roman Blinds don't have locking mechanism - Opinions needed
Hey guys,
I need some opinions. I had Custom Roman blinds put on three windows, this wasn't a Sears, blind store pre-made set, it was all custom made by a Blinds,Drapes designer here in Montreal, he does a lot of wealthy clients (I'm not one of them). Here's my prob, to my surprise there is no locking mechanisms on any of these, you have to pull the string and they tie it around a hook he has on the side of the window frame to lock it in the position you want. Now the windows are really large so whether or not we had a locking machanism we would have to tie the cord if we wanted to keep it out of sight, right now it's pretty cool since where he has it, it actually sits behind the blinds so you don't even see it. Now the guy claims he would never uses locking mechanisms in customs jobs because he claims they are cheap and tend to break very easily. At the same time these will be kids rooms in the future and he also used that as an argument that kids break them so easily. So now when I want to close the blinds I have to pull the string and then tie it to the hook to lock it in that position. Just wanted some feedback, what do you guys think? I find it pretty annoying to have to do that, but at the same time the material that we chose was so that these blinds would almost always remain closed because they let in light (minus the glare). He said he could put in the locking mechanism but he doesn't recommend doing it..and of course I'll have to pay for him to do it, he refused at first but finally gave in. Feedback wanted please. |
Ads |
#2
|
|||
|
|||
I have made Roman blinds myself and did not use a locking mechanism
(didn't even know one was available until your post G). I use a double hook arrangement on the wall - I can loop the cord around very easily/quickly. Not exactly sure how to explain the looping pattern - you twist the loop once before putting onto the hook and then, if desired, do a few figure eights around the two hooks - it's the same kind of loop using in boating to fasten mooring ropes. IMO, it's easier to use than the locking mechanism that I have on my venetian blinds. Allison Rockstead wrote: Hey guys, I need some opinions. I had Custom Roman blinds put on three windows, this wasn't a Sears, blind store pre-made set, it was all custom made by a Blinds,Drapes designer here in Montreal, he does a lot of wealthy clients (I'm not one of them). Here's my prob, to my surprise there is no locking mechanisms on any of these, you have to pull the string and they tie it around a hook he has on the side of the window frame to lock it in the position you want. Now the windows are really large so whether or not we had a locking machanism we would have to tie the cord if we wanted to keep it out of sight, right now it's pretty cool since where he has it, it actually sits behind the blinds so you don't even see it. Now the guy claims he would never uses locking mechanisms in customs jobs because he claims they are cheap and tend to break very easily. At the same time these will be kids rooms in the future and he also used that as an argument that kids break them so easily. So now when I want to close the blinds I have to pull the string and then tie it to the hook to lock it in that position. Just wanted some feedback, what do you guys think? I find it pretty annoying to have to do that, but at the same time the material that we chose was so that these blinds would almost always remain closed because they let in light (minus the glare). He said he could put in the locking mechanism but he doesn't recommend doing it..and of course I'll have to pay for him to do it, he refused at first but finally gave in. Feedback wanted please. |
#3
|
|||
|
|||
How wide are your blinds? The cord and cleat method is fine for smaller
shades. The cord lock on mine sometimes give me a hard time (coming down) and its only 60" wide. Anything over 60", I would suggest using a clutch mechanism. Are your blinds lined? If unlined, the cord and cleat method should be okay. Its the "old" way and if it ain't broken, don't fix it! btw, cord locks run about $3 each. Rockstead wrote: Hey guys, I need some opinions. I had Custom Roman blinds put on three windows, this wasn't a Sears, blind store pre-made set, it was all custom made by a Blinds,Drapes designer here in Montreal, he does a lot of wealthy clients (I'm not one of them). Here's my prob, to my surprise there is no locking mechanisms on any of these, you have to pull the string and they tie it around a hook he has on the side of the window frame to lock it in the position you want. Now the windows are really large so whether or not we had a locking machanism we would have to tie the cord if we wanted to keep it out of sight, right now it's pretty cool since where he has it, it actually sits behind the blinds so you don't even see it. Now the guy claims he would never uses locking mechanisms in customs jobs because he claims they are cheap and tend to break very easily. At the same time these will be kids rooms in the future and he also used that as an argument that kids break them so easily. So now when I want to close the blinds I have to pull the string and then tie it to the hook to lock it in that position. Just wanted some feedback, what do you guys think? I find it pretty annoying to have to do that, but at the same time the material that we chose was so that these blinds would almost always remain closed because they let in light (minus the glare). He said he could put in the locking mechanism but he doesn't recommend doing it..and of course I'll have to pay for him to do it, he refused at first but finally gave in. Feedback wanted please. |
#4
|
|||
|
|||
I, personally, would leave the locking mechanism out. They do break easily,
they are difficult to control and generally I just don't like them. I am (one of these days....when I am 200+ and get around to doing all I dream of) wanting to figure out how to make my own Roman Shades so that I can be rid of the locking mechanism! I hope you enjoy your blinds either way! They sound wonderful! Dannielle "Rockstead" wrote in message om... Hey guys, I need some opinions. I had Custom Roman blinds put on three windows, this wasn't a Sears, blind store pre-made set, it was all custom made by a Blinds,Drapes designer here in Montreal, he does a lot of wealthy clients (I'm not one of them). Here's my prob, to my surprise there is no locking mechanisms on any of these, you have to pull the string and they tie it around a hook he has on the side of the window frame to lock it in the position you want. Now the windows are really large so whether or not we had a locking machanism we would have to tie the cord if we wanted to keep it out of sight, right now it's pretty cool since where he has it, it actually sits behind the blinds so you don't even see it. Now the guy claims he would never uses locking mechanisms in customs jobs because he claims they are cheap and tend to break very easily. At the same time these will be kids rooms in the future and he also used that as an argument that kids break them so easily. So now when I want to close the blinds I have to pull the string and then tie it to the hook to lock it in that position. Just wanted some feedback, what do you guys think? I find it pretty annoying to have to do that, but at the same time the material that we chose was so that these blinds would almost always remain closed because they let in light (minus the glare). He said he could put in the locking mechanism but he doesn't recommend doing it..and of course I'll have to pay for him to do it, he refused at first but finally gave in. Feedback wanted please. |
#5
|
|||
|
|||
Custom Roman Blinds don't have locking mechanism - Opinions needed I make Roman blinds for clients, as well as having installed them throughout my house. The first sets I made, I insisted on stringing them using those expensive locking mechanisms. I do like the concept of the locking mech., but in practice, they...well,... really suck. The guides within the mechanism are very hard on the cords, chewing them to shreds over a short period of time, and so far I have had to re-string these shades three times, which is a colossal PITA. It would be an expensive undertaking if you had to pay someone to re-string the shades regularly, and I stress to you that this is NOT a fun/quick job, and should be paid for handsomely, as it will not be the installer/maker's fault--no flaw in the making, just damages from use. Next time I take my shades down, it will be to install the cleats which your custom designer favors. I would recommend that you trust him, he seems to know his materials. Not only are kids (in my case, a grown up, yet impatient H) hard on such relatively delicate items, (they have also popped rings off the shade backs while jerking on the locking mechs); I believe most states require 'break-away' cords to be installed on shades when they are used in children's rooms. I got around that in my own house by braiding the cords in a decorative manner, so they form one strand.(safety for visiting Gkids.) When I made and installed shades in DD's house, having learned the hard way, I got smart and installed cleats, plus added some decorative pulls to the ends of the braided cords. Once you get used to adjusting the cords around the cleats, you will find you can tie them off quickly, and it will be less of an annoyance. Personally, I love Roman blinds for the light and heat control they provide, as well as privacy. HTH. Cea ---------------- (Rockstead) Hey guys, I need some opinions. I had Custom Roman blinds put on three windows, this wasn't a Sears, blind store pre-made set, it was all custom made by a Blinds,Drapes designer here in Montreal, he does a lot of wealthy clients (I'm not one of them). Here's my prob, to my surprise there is no locking mechanisms on any of these, you have to pull the string and they tie it around a hook he has on the side of the window frame to lock it in the position you want. Now the windows are really large so whether or not we had a locking machanism we would have to tie the cord if we wanted to keep it out of sight, right now it's pretty cool since where he has it, it actually sits behind the blinds so you don't even see it. Now the guy claims he would never uses locking mechanisms in customs jobs because he claims they are cheap and tend to break very easily. At the same time these will be kids rooms in the future and he also used that as an argument that kids break them so easily. So now when I want to close the blinds I have to pull the string and then tie it to the hook to lock it in that position. Just wanted some feedback, what do you guys think? I find it pretty annoying to have to do that, but at the same time the material that we chose was so that these blinds would almost always remain closed because they let in light (minus the glare). He said he could put in the locking mechanism but he doesn't recommend doing it..and of course I'll have to pay for him to do it, he refused at first but finally gave in. Feedback wanted please. |
#6
|
|||
|
|||
I made 4 matching Folded Roman Blinds for our last home, and I just did the
string, with a cleat on the side of the window. I marked where the strings would be in the down position, then took the 4 or 5 strings and braided them. I like how the 4 way and 5 way braid came out, I ended up making a couple dog leashes the same way, but went with 6 way braid. Never heard of the locking mechanism for roman blinds until now, but I still like the way mine came out. Maine-iac Rose @--- remove the thorns and add a hyphen between the 2 words to email me. |
#8
|
|||
|
|||
There's an old adage called the K.I.S.S. Principle. Keep It Simple Stupid.
Well known to engineers. -- it's easier to run away with your kilt up than with your pants down. Mike in Wisconsin "Taria" wrote in message ... My roman blinds are custom made by me! I love them and they just have the cleats. I don't know about the mechanisms but am sure Cea is right. Sometimes simplicity is the most effective solution. TAria wrote: Custom Roman Blinds don't have locking mechanism - Opinions needed I make Roman blinds for clients, as well as having installed them throughout my house. The first sets I made, I insisted on stringing them using those expensive locking mechanisms. I do like the concept of the locking mech., but in practice, they...well,... really suck. The guides within the mechanism are very hard on the cords, chewing them to shreds over a short period of time, and so far I have had to re-string these shades three times, which is a colossal PITA. It would be an expensive undertaking if you had to pay someone to re-string the shades regularly, and I stress to you that this is NOT a fun/quick job, and should be paid for handsomely, as it will not be the installer/maker's fault--no flaw in the making, just damages from use. Next time I take my shades down, it will be to install the cleats which your custom designer favors. I would recommend that you trust him, he seems to know his materials. Not only are kids (in my case, a grown up, yet impatient H) hard on such relatively delicate items, (they have also popped rings off the shade backs while jerking on the locking mechs); I believe most states require 'break-away' cords to be installed on shades when they are used in children's rooms. I got around that in my own house by braiding the cords in a decorative manner, so they form one strand.(safety for visiting Gkids.) When I made and installed shades in DD's house, having learned the hard way, I got smart and installed cleats, plus added some decorative pulls to the ends of the braided cords. Once you get used to adjusting the cords around the cleats, you will find you can tie them off quickly, and it will be less of an annoyance. Personally, I love Roman blinds for the light and heat control they provide, as well as privacy. HTH. Cea ---------------- (Rockstead) Hey guys, I need some opinions. I had Custom Roman blinds put on three windows, this wasn't a Sears, blind store pre-made set, it was all custom made by a Blinds,Drapes designer here in Montreal, he does a lot of wealthy clients (I'm not one of them). Here's my prob, to my surprise there is no locking mechanisms on any of these, you have to pull the string and they tie it around a hook he has on the side of the window frame to lock it in the position you want. Now the windows are really large so whether or not we had a locking machanism we would have to tie the cord if we wanted to keep it out of sight, right now it's pretty cool since where he has it, it actually sits behind the blinds so you don't even see it. Now the guy claims he would never uses locking mechanisms in customs jobs because he claims they are cheap and tend to break very easily. At the same time these will be kids rooms in the future and he also used that as an argument that kids break them so easily. So now when I want to close the blinds I have to pull the string and then tie it to the hook to lock it in that position. Just wanted some feedback, what do you guys think? I find it pretty annoying to have to do that, but at the same time the material that we chose was so that these blinds would almost always remain closed because they let in light (minus the glare). He said he could put in the locking mechanism but he doesn't recommend doing it..and of course I'll have to pay for him to do it, he refused at first but finally gave in. Feedback wanted please. |
#9
|
|||
|
|||
Custom Roman Blinds don't have locking mechanism - Opinions needed Group: rec.crafts.textiles.sewing Date: Sat, Jul 10, 2004, 2:29pm (EDT-1) From: (Mike=A0Behrent) There's an old adage called the K.I.S.S. Principle. Keep It Simple Stupid. Well known to engineers. --- Gee, thanks, that's helpful, Mike. Cea sarcasm intended --- "Taria" wrote: My roman blinds are custom made by me! I love them and they just have the cleats. I don't know about the mechanisms but am sure Cea is right. Sometimes simplicity is the most effective solution. TAria Custom Roman Blinds don't have locking mechanism - Opinions needed snipped |
#10
|
|||
|
|||
Thanks for the feedback guys, at first I thought my contractor was
cheaping out on me by not including a locking mechanism, now I realize by your feedback that this is common practice and seems to be the right decision. "Maine-iac Rose" wrote in message ... I made 4 matching Folded Roman Blinds for our last home, and I just did the string, with a cleat on the side of the window. I marked where the strings would be in the down position, then took the 4 or 5 strings and braided them. I like how the 4 way and 5 way braid came out, I ended up making a couple dog leashes the same way, but went with 6 way braid. Never heard of the locking mechanism for roman blinds until now, but I still like the way mine came out. Maine-iac Rose @--- remove the thorns and add a hyphen between the 2 words to email me. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Roman blinds | Lizzie | Sewing | 6 | August 12th 03 04:28 AM |