A crafts forum. CraftBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » CraftBanter forum » Craft related newsgroups » Glass
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

What are the characteristics of Mullite Brick?



 
 
Thread Tools Display Modes
  #1  
Old August 16th 16, 09:44 AM posted to rec.crafts.glass
refractory
external usenet poster
 
Posts: 7
Default What are the characteristics of Mullite Brick?

Mullite brick with mullite as phase of high aluminum refractory material. Has
higher refractoriness, can reach

more than 1790 ℃. So what quality characteristics does Mullite brick have?

1. The brick binder of mullite brick. Mullite brick uses adhesive to connect
between contact, therefore, the

solid degree of adhesive bonding to give full play to the excellent properties
of mullite brick base material, to

the final use performance of the products is a very important factor.

2. Bulk density of mullite brick. The density of thermal insulation material
generally should be lower than 600

kg/m. Small bulk density of material, generally tears eyes coefficient of
thermal conductivity is small, but at

the same time decreases in the mechanical strength, so need to reasonably
choice.

3. The mechanical strength of mullite brick. To make the insulation material
non-deformation and damage under

their own weight and external force, so its compressive strength should not be
less than 3 kg/cm.

4. The water absorption of mullite brick. After insulation material absorbing
water, not only can greatly reduce

the thermal insulation performance, but also can accelerate the corrosion of
metal, it is very harmful.

Therefore, need to choose small bibulous rate of thermal insulation material.

5. The heat resistance and use temperature of mullite brick. According to
different situation of use place's

temperature to choose different heat insulation performance of thermal
insulation material. The highest use

temperature is the basis of the thermal insulaion material's heat resistance.


--


Ads
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
What are the advantages of Mullite Insulation Brick? refractory Glass 0 August 3rd 16 04:44 AM
BRICK-A-BRACK [email protected] Quilting 5 July 6th 16 02:32 AM
two brick roads Karen, Queen of Squishies Quilting 19 June 24th 06 11:01 PM
need source for Mullite rods Boner the Cat Glass 5 February 17th 05 11:59 PM
Brick Stitch CLP Beads 0 October 14th 03 10:00 PM


All times are GMT +1. The time now is 01:03 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CraftBanter.
The comments are property of their posters.