CraftBanter

CraftBanter (http://www.craftbanter.com/index.php)
-   Quilting (http://www.craftbanter.com/forumdisplay.php?f=18)
-   -   Rowenta irons (http://www.craftbanter.com/showthread.php?t=87375)

Donna in Idaho[_2_] September 20th 07 06:39 PM

Rowenta irons
 
I just bought a new Rowenta (made in China) at Penneys that I'm going to
return. It doesn't get very hot & doesn't really put out much steam. I
have an old Rowenta that gets really hot, puts out a lot of steam, but spits
water. I've probably had this one for 7 or 8 years. The model # on it
starts with DM, so guess it was made in Denmark. It started spitting a
couple years ago, but I guess I'd rather deal with that than one that
doesn't get hot. I know some people don't use steam, but I really like
steam better when I'm trying to press a seam than I like spraying water from
a spray bottle that gets everything else wet besides the seam I want to
press. About a year ago, I bought one of the Oliso (or however you spell
it) irons. Returned it because it didn't get very hot either. Maybe some
day I'll find an iron I like! Until then I'll use this old Rowenta. I like
irons that get hot!!!

Donna in Idaho




Lizzy Taylor September 20th 07 07:03 PM

Rowenta irons - try a Philips
 
Donna in Idaho wrote:
I just bought a new Rowenta (made in China) at Penneys that I'm going to
return. It doesn't get very hot & doesn't really put out much steam. I
have an old Rowenta that gets really hot, puts out a lot of steam, but spits
water. I've probably had this one for 7 or 8 years. The model # on it
starts with DM, so guess it was made in Denmark. It started spitting a
couple years ago, but I guess I'd rather deal with that than one that
doesn't get hot. I know some people don't use steam, but I really like
steam better when I'm trying to press a seam than I like spraying water from
a spray bottle that gets everything else wet besides the seam I want to
press. About a year ago, I bought one of the Oliso (or however you spell
it) irons. Returned it because it didn't get very hot either. Maybe some
day I'll find an iron I like! Until then I'll use this old Rowenta. I like
irons that get hot!!!


Over here in the UK I have been using a Philips Mistral for some years
now. Mine does get good and hot and steams well. It doesn't have auto
shut off - but I don't think they tend to over here. After a brief
search I have only found one site selling them online in the US:

http://www.thebuyersclub.com/irons.htm

NAYY, YMMV but I *do* like the irons (and so does MIL and she is a demon
ironer of all laundry items)

Lizzy

Donna in Idaho[_2_] September 20th 07 07:09 PM

Rowenta irons - try a Philips
 
According to the specs on the Mistral, it has automatic shut off. That's
the other problem - it's getting harder and harder to find irons that don't
have automatic shutoff.

Donna in Idaho


Over here in the UK I have been using a Philips Mistral for some years
now. Mine does get good and hot and steams well. It doesn't have auto
shut off - but I don't think they tend to over here. After a brief
search I have only found one site selling them online in the US:

http://www.thebuyersclub.com/irons.htm

NAYY, YMMV but I *do* like the irons (and so does MIL and she is a demon
ironer of all laundry items)

Lizzy




Lizzy Taylor September 20th 07 09:49 PM

Rowenta irons - try a Philips
 
Donna in Idaho wrote:
According to the specs on the Mistral, it has automatic shut off. That's
the other problem - it's getting harder and harder to find irons that don't
have automatic shutoff.


I suspect Euro & US specs have different "expected/standard (safety)
features" unfortunately.

Lizzy

Donna in Idaho[_2_] September 20th 07 09:58 PM

Rowenta irons - try a Philips
 
I guess the U.S. doesn't think we have sense enough to turn off an iron! I
wish they would make them so you have the choice, but I'm sure that will
never happen.

Donna in Idaho

"Lizzy Taylor" wrote in message
...
Donna in Idaho wrote:
According to the specs on the Mistral, it has automatic shut off. That's
the other problem - it's getting harder and harder to find irons that
don't
have automatic shutoff.


I suspect Euro & US specs have different "expected/standard (safety)
features" unfortunately.

Lizzy




Lizzy Taylor September 20th 07 10:06 PM

Rowenta irons - try a Philips
 
Donna in Idaho wrote:
I guess the U.S. doesn't think we have sense enough to turn off an iron! I
wish they would make them so you have the choice, but I'm sure that will
never happen.


Do your instructions have the great line "Do not iron clothes on body" ?

Lizzy

Donna in Idaho[_2_] September 20th 07 10:12 PM

Rowenta irons - try a Philips
 
Yep, the iron I just bought says that!

We also have the instructions on the cardboard shades you can put inside
your car windshield while parked in the sun "Don't drive your car with shade
in place" - like I'm going to drive down the road with cardboard covering
the windshield!!!!!

Donna in Idaho

"Lizzy Taylor" wrote in message
...
Donna in Idaho wrote:
I guess the U.S. doesn't think we have sense enough to turn off an iron!
I
wish they would make them so you have the choice, but I'm sure that will
never happen.


Do your instructions have the great line "Do not iron clothes on body" ?

Lizzy




Karen, Queen of Squishies September 21st 07 01:13 AM

Rowenta irons
 
You might try one of those Black & Decker's John just bought. When my old
Rowenta dies I'm going to get one of those. Sounds like the new Rowentas
are bad news.

Karen, Queen of Squishies


I just bought a new Rowenta (made in China) at Penneys that I'm going to
return. It doesn't get very hot & doesn't really put out much steam. I
have an old Rowenta that gets really hot, puts out a lot of steam, but
spits water. I've probably had this one for 7 or 8 years. The model # on
it starts with DM, so guess it was made in Denmark. It started spitting a
couple years ago, but I guess I'd rather deal with that than one that
doesn't get hot. I know some people don't use steam, but I really like
steam better when I'm trying to press a seam than I like spraying water
from a spray bottle that gets everything else wet besides the seam I want
to press. About a year ago, I bought one of the Oliso (or however you
spell it) irons. Returned it because it didn't get very hot either. Maybe
some day I'll find an iron I like! Until then I'll use this old Rowenta.
I like irons that get hot!!!

Donna in Idaho






John September 21st 07 01:26 AM

Rowenta irons - try a Philips
 
On Sep 20, 5:06 pm, Lizzy Taylor wrote:
Donna in Idaho wrote:
I guess the U.S. doesn't think we have sense enough to turn off an iron! I
wish they would make them so you have the choice, but I'm sure that will
never happen.


Do your instructions have the great line "Do not iron clothes on body" ?

Lizzy


Those types of disclaimers are boilerplate things that legal corporate
people have found necessary because somebody will try to do just what
they caution against and then sue the company. Just remember the guy
who spilled the cup of coffee on his lap and sued the place that sold
it to him because it was to hot and when he spilled it on himself he
burned himself. I believe I heard that something like 3/4's of the
cost of ladders is for liability insurance for the manufactures
because people use them stupidly and then file suit when something
goes south. We are litigious society.


John


joanb September 21st 07 10:28 AM

Rowenta irons - try a Philips
 
On Sep 21, 1:26 am, John wrote:
On Sep 20, 5:06 pm, Lizzy Taylor wrote:

Donna in Idaho wrote:
I guess the U.S. doesn't think we have sense enough to turn off an iron! I
wish they would make them so you have the choice, but I'm sure that will
never happen.


Do your instructions have the great line "Do not iron clothes on body" ?


Lizzy


Those types of disclaimers are boilerplate things that legal corporate
people have found necessary because somebody will try to do just what
they caution against and then sue the company. Just remember the guy
who spilled the cup of coffee on his lap and sued the place that sold
it to him because it was to hot and when he spilled it on himself he
burned himself. I believe I heard that something like 3/4's of the
cost of ladders is for liability insurance for the manufactures
because people use them stupidly and then file suit when something
goes south. We are litigious society.

John


It occurs to me, (not at all a handy person) that if an iron is
manufactured in Europe, maybe it has european insides, which would
make it not heat up much with only your 110 ac current. We have 220 ac
current here in UK, and if I were to plug my iron from here into your
current, it would not heat up much? If I were to plug a US iron in
here, it would overheat and blow up. Somebody is getting the specs
mixed up I think.

Joan
Coventry UK



All times are GMT +1. The time now is 07:13 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
CraftBanter.com