CraftBanter

CraftBanter (http://www.craftbanter.com/index.php)
-   Quilting (http://www.craftbanter.com/forumdisplay.php?f=18)
-   -   Fabric cutting table plans (http://www.craftbanter.com/showthread.php?t=33888)

Brian and Lisa Fields September 1st 04 09:45 PM

Fabric cutting table plans
 
Hi again...I am wanting to make a fabric cutting table for my wife. Anyone
have any ideas where I can find the plans for it???? She already has me
making clear acrylic templates for her, so what is one more project?????

Brian Fields



Patti September 1st 04 10:07 PM

Hullo Brian
Sorry, no plans; but I just wanted to say that the most important factor
in this kind of table is the *height*. Whatever plans you use, you will
be able to adjust that to suit your wife exactly. You will first have
to find, trial and error probably, a surface of a height she could cut
at with the right amount of pressure, for as long as she might want to,
then measure it and 'save' that measurement for when you get the plans.
You are a good DH!!
..
In article , Brian and Lisa Fields
writes
Hi again...I am wanting to make a fabric cutting table for my wife. Anyone
have any ideas where I can find the plans for it???? She already has me
making clear acrylic templates for her, so what is one more project?????

Brian Fields



--
Best Regards
pat on the hill

nzl* September 1st 04 10:11 PM

http://kckintz.home.att.net/table/table.html
this might help with some ideas for you.
jeanne
--
http://community.webshots.com/user/nzlstar
real reply is san-fran at ihug dot co dot nz
nzlstar on yahoo msg'r

"Brian and Lisa Fields" wrote...
Hi again...I am wanting to make a fabric cutting table for my wife. Anyone
hve any ideas where I can find the plans for it???? She already has me mking
clear acrylic templates for her, so what is one more project?????
Brian Fields




Denise Jameson September 2nd 04 12:12 AM

Hi Jeanne,

I believe he asked for CUTTING table...not sewing table. But thanks,
I enjoyed looking at KCK's great table yet again. Got to meet him too
in Houston, 2002. g I actually copied some of his suggestions for
my own sewing table! :-)

Denise in Ontario, Canada

On Thu, 2 Sep 2004 09:11:12 +1200, "nzl*"
wrote:

http://kckintz.home.att.net/table/table.html
this might help with some ideas for you.
jeanne




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

nzl* September 2nd 04 12:13 AM

oops, ta, Denise.
ah well, might be useful for someone. :)
jeanne
--
http://community.webshots.com/user/nzlstar
real reply is san-fran at ihug dot co dot nz
nzlstar on yahoo msg'r

"Denise Jameson" wrote...
Hi Jeanne,
I believe he asked for CUTTING table...not sewing table. But thanks, I
enjoyed looking at KCK's great table yet again. Got to meet him too in
Houston, 2002. g I actually copied some of his suggestions for my own
sewing table! :-)
Denise in Ontario, Canada

"nzl*" wrote:

http://kckintz.home.att.net/table/table.html
this might help with some ideas for you.
jeanne





Brian and Lisa Fields September 2nd 04 12:37 AM

Ha! Got enough on my hands..yes, wifey has me looking for plans to make a
fabric cutting table..I think she has in mind a quilting/fabric room from
*ell!!!!!! The question is what will be next????

Brian





dreamboat September 2nd 04 02:21 AM

Go to Hancocks or Joann's and buy one of those they
have that has two ends that fold up. Sometimes they
run a sale on them for $79.00.
dreamboat
"Brian and Lisa Fields" wrote in message
...
Hi again...I am wanting to make a fabric cutting table for my wife. Anyone
have any ideas where I can find the plans for it???? She already has me
making clear acrylic templates for her, so what is one more project?????

Brian Fields





Sandy Foster September 2nd 04 02:53 AM

In article ,
Denise Jameson wrote:

But thanks,
I enjoyed looking at KCK's great table yet again. Got to meet him too
in Houston, 2002. g I actually copied some of his suggestions for
my own sewing table! :-)

Denise in Ontario, Canada


A quilting friend of mine adapted my table (hi, Carl!), so that's on
Kevin's site, too. It just goes to show that almost any table can be
improved upon! :)
--
Sandy in Henderson, near Las Vegas
my ISP is earthlink.net -- put sfoster1(at) in front
http://home.earthlink.net/~sfoster1

merrystitch September 2nd 04 07:06 PM

I have one of those & I love it. Folds up and only takes up about 13 x 35"
of floor space.

When my DH looked at it, he decided it would cost him more than that to
build one.

Merrystitch



BigDaddy September 4th 04 12:16 AM

Here is a link to plans for a table almost exactly like the one they sell at
Joanns.

http://tinylink.com/?y8FLaeUEcr

This is my next project. Just make sure to make the heigth fit your missus.

Don




All times are GMT +1. The time now is 06:45 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
CraftBanter.com